Este es el soporte que todos conocemos
Y este el desarrollado para el M38A1
Ben Dover escribió:
This is the later version of the SC-C-28591 Bracket, note that it extends across the joint of the M-38A1 rear body side and the rear body panel and alligns with the Trailer Receptacle Grounding Screw.
NOTE the Guide A2 Reflector with Guidex Lens and proper screw used fto attach the reflector to the Jeep.
Ben Dover escribió:Late bracket.
Note the NOS Goodyear 700X16 NDCC.
Aqui las comparaciones entre ambos
Ben Dover escribió:
Do not forget to use the correct toothed washers (Int/External Tooth)
Most of the present M-38A1 Collectors are unaware of the upper bracket which is designed for the wider body of the M-38A1
Ben Dover escribió:Upper bracket is the earlier SC-C-28591
Note the mounting holes on the late bracket on the bottom.
Tom Wolboldt escribió:Yes!
Also the right side rear mounting holes barely pass to the right of the body seam and the slot does not come close to indexing the single screw head on a M38A1.
I also have a third style bracket, not shown in the above photos, that mounts up against the trailer socket and perfectly indexes the single screw head on a M38A1
Aqui está el post original de donde extraje las fotografias. http://www.g503.com/forums/viewtopic.php?f=13&t=172104
Lo que no encuentro explicación es el porque del desplazamiento...será para inclinar la antena hacia adelante sobre el lateral del jeep,estando la capota instalada y que esta no estorbe??
Saludos