Moderador: administrador
oldtime escribió:Here is a pic of a 1961 Harrison from a 3B.
I of the fin and tube design having 7 fins per inch.
Tubes are spaced at 9/16" apart.
Here you see the Harrison numbers on the front of the upper tank.
The soldered ID tag.
The Harrison method of radiator identification changed over the years.
The size and location of the tags changed.
oldtime escribió:The mounting frame
The shroud:
3 Sheet screws used on each side used to attach this shroud to the frame
oldtime escribió:The Harrison radiator company was replaced by Modine in 1965.
This radiator is an OEM NOS Modine that I own.
This radiator was only used on CJ-3B and M606.
I would expect this to be installed on 3B's and M606 sometime after 1964.
Like the Harrison it has tubes spaced 9/16" apart.
However it has greater cooling due to having 12 fins per inch.
However having more fins per inch the radiator core can more easily clog from dirt and debris.
The shroud does not fit this radiator.
It' the exact same radiator that you previously shown.
( Sorry I forgot to get pic showing the top tank numbers)
oldtime escribió:Luis, Here is the top of my Modine:
The following shows the Harrison shroud setting on top of the narrower Modine.
Both sides of shroud are about 3/4" too wide.
Volver a M606 M606A2 M606A3 Información tecnica
Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 2 invitados